Wall Mounted Sensor Tap | Wall Mount Sensor Faucet

The wall mounted sensor tap KEG-11-B110AD uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Wall mounted sensor tap is also called wall mount sensor faucet or wall mounted sensor faucet.

The sensor tap is mounted on the wall which is quite suitable for bathrooms and public restrooms. The wall mounted sensor tap automatically adjusts the sensor distance according to working conditions and environment.We also have wall mounted soap dispenser which can be installed near the faucet.

Brand: KEGE
Item No: KEG-11-B110A
Easy installation and cleaning
Automatic adjusting sensor distance
Hygienic, bacteria and germs free without touching
MOQ: 1pcs
Low prices: $45-$65 based on different requirements and quantities.
Warranty: one year.

Request samples

How does the wall mounted sensor tap work?

The wall mounted sensor tap is installed on the wall. It has the sensor eye on the spout. When you put your hands near the faucet spout and in the sensor detection range, the water starts flowing automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.

The wall mounted faucet with sensor can adjust the sensor distance automatically according to working conditions and the environment.

Features:

Touchless wave-on sensor: wave the sensor without touch, water flows, wave again, water stops. Water stops automatically after 1min continuously flow.
Automatically adjusting the sensing distance.
Water-saving: Water-efficient faucet reduces overall water usage without sacrificing water.
Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for one year.
Easy installation and cleaning.
Outside connected battery box for a convenient changing between AC,DC and AD.
Healthy and Safe: with the touch-free faucet, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.

Appearance
Spare parts
Dimension
Specification
Package

Appearance

Spare parts

The touchless faucet is the same structure as the others. It has a faucet body with sensor eyes. And a control box with a battery holder and solenoid valve inside.

You can choose a different power supply with either DC 6V or AC 110-240V.

Dimension

Technical specification:

Power supply	Material	Inlet/Outlet diameter	Temperature mixer	Static consumption	Sensor distance	Sensitivity	Max. water flow	Working temperature	Storage temperature	Response time	Water pressure
DC 4.5-6.4V 4pcs AA alkaline batteries	Brass with chrome surface	G1/2″	No/for cold water only, but can install a mixer valve	≦ 40 uA	1.Adjustable range 7-21CM 2. Default distance when power connected 9±10%CM Sensor distance will automatically be adjusted in 30s.	0.512s	60s±6s	0 ~ 50 ℃	-40 ~ 80 ℃	Open≤1s, close≤1.5s	0.05MPa-0.6MPa

Package

Net weight	Gross Weight	Inner package	Outer package	Quantity per carton
2.3KG	2.8KG	380170113mm	525395360mm	9pcs

Automatic on/off

Infrared sensor faucet automatically turns on and off (Convenience & Hygiene).
Time Limit: Washing time is set for 60 seconds.

Low Power Indication

This may indicate it is time to replace existing batteries with new ones or there is not enough power to place the battery.

Sensor Distance Automatically Adjusted

The Sensor distance is automatically adjusted according to working conditions and environment.When power on, the sensor distance will automatically be adjusted in 30s.

BATTERY AND MAIN POWER SUPPLY

Power supply: DC6V/AC110-240V
Compact suitable size
The valve will automatically stop flowing water if no power is supplied.

Installation

Fix faucet body to the basin with nuts and gaskets
Drill two holes in wall and fix control box under the basin
Connect the faucet water hose to the control box.
Connect the sensor wire.
Plug the adapter into the main power supply.

Important Note: Make sure all the wires are well connected. Make sure the batteries are installed correctly.

Automatic Wall Mounted Sensor Faucet KEG-8131 Installation

Wall mounted sensor tap battery replacement

The indicator light will flash continuously if battery power is low. It is reminding you to replace the batteries.

Step 1: Remove the battery case cover.
Step 2: Replace with 4 AA alkaline batteries.

Make sure the batteries are installed correctly (positive and negative charge).
Do NOT mix new old batteries.
Do NOT mix batteries of different brands.

Motion sensor faucet troubleshooting
Problem	Possible Reason	Suggested Solution
No water flow	Batteries run out	Replace batteries
	Dirt on sensor surface	Clean the sensor surface
	Main water supply is shut off	Turn main water supply on
	Dirt on water filter net	Clean the water filter net
	Water pressure is not applicable	Refer to technical specification
Have a continuous water flow problem	Batteries run out	Replace batteries
Have a continuous water flow problem	Low water pressure	Refer to technical specification
Having leakage after turning off the faucet	Low water pressure	Refer to technical specification
Having leakage after turning off the faucet	Dirt on water filter net	Clean the water filter net

People who are asking more:

A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in frontof the sensor will start the water flow, and the water will stop when you take your hand away.
If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuously flow, time can be set.
More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins,sink or lavatory, from classic to modern.

Yes, the touchless faucet is quite reliable. The technology of the infrared sensor is stable and developed for many years. Every KEGE touchless faucets are tested by life testing, valve on/off testing, infrared sensor distance testing and salt spraying testing. Sensor lifespan:500,000 times on and off, valve lifespan:1,000,000 times opening.

In the future modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.

Touchless faucets use infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just placing your hand under the spout sensor, the sensor will give the solenoid valve a signal to open, then the water will start flow; When you take your hand away, the sensor will indicate the solenoid valve to close, then water flow will stop.

For more details, please visit our blog HOW DOES TOUCHLESS FAUCETS WORK .

The touchless faucet needs electricity for sure. Both the sensor and solenoid valve works need electricity power. Normally three choices: DC 6V: 4xAA alkaline batteries; AC: using a transformer to transfer power from 220V/380V to 6V; Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

6V with 4xAA alkaline batteries shall last approximately 3000 times/month for one year.

TOUCHLESS FAUCET TROUBLESHOOTING

Problem	Possible Reason	Suggested Solution
No water flow	Batteries run out	Replace batteries
No water flow	Dirt on sensor surface surface	Clean the sensor surface
No water flow	Main water supply is shut off	Turn main water supply on
No water flow	Dirt on water filter net	Clean the water filter net
No water flow	Water pressure is not applicable	Refer to technical specification
Have a continuous water flow problem	Batteries run out	Replace batteries
Have a continuous water flow problem	Low water pressure	Refer to technical specification
Having leakage after turning off the faucet	Dirt on water filter net	Clean the water filter net