The wall mounted automatic faucet KEG-11-B113D is also called wall mount sensor faucet,wall mounted sensor tap, wall mounted touchless faucet. It’s an all in one wall mount automatic faucet that integrated all the parts inside the faucet. There is no outside cable connection needed.
The automatic wall mount faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. The touchless faucet is mounted on the wall which is quite suitable for count top basins. It saves space on the countertop. We also have wall mounted soap dispenser which can be installed near the faucet.
How does the wall mounted automatic faucet work?
The wall mounted automatic faucet is installed on the wall. It has the sensor eye on the spout. When you put your hands near the faucet spout and in the sensor detection range, the water starts flowing automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.
The wall mounted sensor faucet KEG-11-B113D integrated the sensor, solenoid valve, and battery box together in the faucet body. There are no cable wires outside need to connect.
The working principle is easy and it is so easy and convenient to use wall mounted automatic faucet. If you want to check more details, you can check our blog here.
Product details
The wall mounted automatic faucet is an all in one faucet with all the subparts inside the faucet body. The faucet is also smart and modern looking. The raw material is brass which is durable. The chrome surface is easy to clean.
Dimension
Technical specification:
| Power supply | Material | Inlet/Outlet diameter | Temperature mixer | Static consumption | Sensor distance | Sensitivity | Max. water flow | Working temperature | Storage temperature | Response time | Water pressure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DC 4.5-6.4V 4pcs AA alkaline batteries | Brass with chrome surface | G1/2″ | No/for cold water only, but can install a mixer valve | ≦ 40 uA | 1.Adjustable range 5-15CM 2. Default distance when power connected 10±10%CM | 0.512s | 60s±6s | 0 ~ 50 ℃ | -40 ~ 80 ℃ | Open≤1s, close≤1.5s | 0.05MPa-0.6MPa |
Package
| Net weight | Gross Weight | Inner package | Outer package | Quantity per carton |
|---|---|---|---|---|
| 2.3KG | 2.8KG | 380*170*113mm | 525*395*360mm | 9pcs |
Features:
Automatic turn on/off water
- Infrared sensor faucet automatically turns on and off (Convenience & Hygiene).
- Time Limit: Washing time is set for 60 seconds.
Low voltage detection
This may indicate it is time to replace existing batteries with new ones or there is not enough power to place the battery.
BATTERY pack inside of the faucet body
- Power supply: DC6V with 4pcs AA alkaline batteries
- Suitable size
- The valve will automatically stop flowing if no power is supplied.
Easy installation
Easy to install and no need to drill holes to connect the cables.
How to install the wall mounted automatic faucet?
- Step 1: Fix faucet body to the wall. The faucet inlet thread should be wrapped PTFE tape.
- Step 2: Fix the decorative plate to the faucet body. See the drawing below.
- Step3: Double check the faucet is fixed right in the middle of the basin and make sure the
- Step 4: Take out the battery pack from the faucet body with a screwdriver.
- Step 5: Install 4pcs AA alkaline batteries to the battery pack and fixed back the cover
Important Note: Make sure all the wires are well connected. Make sure the batteries are installed correctly. Test water condition with 0.9MPA water pressure for 60 seconds. The faucet is ready to be used.
Wall mounted automatic faucet battery replacement
The indicator light will flash continuously if battery power is low.It is reminding you to replace the batteries.
- Remove the faucet body cover and take out the battery pack.
- Replace with 4 AA alkaline batteries
- Fix back all the fittings as above picture showed.
- Make sure the batteries are installed correctly (positive and negative charge).
- Do NOT mix new old batteries.
- Do NOT mix batteries of different brands.
Motion sensor faucet troubleshooting |
||
| Problem | Possible Reason | Suggested Solution |
| No water flow | Batteries run out | Replace batteries |
| Dirt on sensor surface | Clean the sensor surface | |
| Main water supply is shut off | Turn main water supply on | |
| Dirt on water filter net | Clean the water filter net | |
| Water pressure is not applicable | Refer to technical specification | |
| Have a continuous water flow problem | Batteries run out | Replace batteries |
| Low water pressure | Refer to technical specification | |
| Having leakage after turning off the faucet | Low water pressure | Refer to technical specification |
| Dirt on water filter net | Clean the water filter net | |
