Spout Mounted Sensor Faucet | Spout Mounted Automatic Faucet

Touchless Faucet with sensor in mouth spout

The spout mounted sensor faucet KEG-8110AD uses active infrared sensor technology that allows starting the flow of water without touching the faucet. The sensor is spout mounted and just wave the hand in front of the spout to start the water, wave again water stop. It is easy to install with a single hole deck mounted on the basin. It’s a commercial touchless faucet that can be widely used in public restrooms or home bathrooms.

Spout mounted sensor faucet is also called spout mounted touchless faucet, spout mounted automatic faucet. The sensor is specially designed concealed in the spout. It is a good habit because when washing hands, people are always aware of putting their hands under the spout, this makes it easy for people using.

Brand: KEGE
Item No: KEG-8110AD
Brass material and chrome polished surface, easy installation, and cleaning
Sensor in mouth spout
Hygienic, bacteria and germs free without touching
MOQ: 1pcs
Warranty: one year.
Sensor Distance: Auto Calibrated
Cheap price: $40-$70 based on the requirement and quantity

Require samples

How does the spout mounted sensor faucet work?

The spout mounted touchless faucet has a sensor near the spout that can adjust the sensor distance automatically based on different working conditions.

When people put their hands near the faucet spout, the water starts automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.

Features:

Touchless wave-on sensor: wave the sensor without touch, water flows, wave again, water stops.
It is controlled by a single-chip microcomputer and has the function of 1-minute timeout to stop water supply, so as to avoid waste of water resources caused by foreign matters in the sensing range for a long time.
Water-saving: Water-efficient faucet reduces overall water usage without sacrificing water.
Automatically adjusting the sensing distance.
Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for one year.
Easy installation and cleaning.
Outside connected battery box for a convenient changing between AC,DC and AD.
Healthy and Safe: with the touch-free faucet, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.

Spare parts
Dimension
Specification
Package

Spare parts

The spare parts include the control box and AC power adapter. In the control box, it has the solenoid valve and DC battery box. With the connector, it connects with the faucet body.

Dimension

Technical specification:

Power supply	Material	Inlet/Outlet diameter	Temperature mixer	Static consumption	Sensor distance	Sensitivity	Max. water flow	Working temperature	Storage temperature	Response time	Water pressure
DC 4.5-6.4V with 4 AA alkaline batteries/ AC110-240V adapter– Output: 5.0-6.5V/1A (Ripple<60mW)	Brass	G1/2″	No/for cold water only, but can install a mixer valve	≦ 40 uA	1.Adjustable sensor range: 7-21cm 2. Default distance 10±10%CM	0.512s	60s±6s	0 ~ 50 ℃	-40 ~ 80 ℃	Open≤1s, close≤1.5s	0.05MPa-0.6MPa

Package

Net weight	Gross Weight	Inner package	Outer package	Quantity per carton
2.3KG	2.8KG	380170113mm	525395360mm	9pcs

Infrared sensor for touchless spout faucet

As the most important part, the work of the sensor is to forward the signals to the valve to turn on the faucet after detecting your hand. Its job is to inform the valve when to start or stop the flow based on the presence or absence of your hands.

The sensor for spout mouth commercial touchless faucet is a smart design sensor. It can be assembled well inside the faucet just near the spout. The sensor distance and flushing time can be adjusted by a remote controller.

Sensor life circle reaches 500,000 times and DC batteries alkaline batteries life circle is about 60,000

Normally the material of the sensor cover is plastic ABS or PA, the infrared beams can pass through it. Kege have about 50 types of different sensor head for the selection. We can also customize the sensor cover according to your products.

Low power indicator

This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.

Sensor Distance Automatically Adjusted

Sensor distance is automatically adjusted according to working conditions and environment.

Battery and Main Power Supply

Power supply: DC6V/AC110-240V
The valve will automatically stop water flowing if no power is supplied.

Battery replacement

When the indicator light continuously and slowly double flashes the alarm, please replace the battery.

Remove the battery case cover.
Replace with 4 AA alkaline batteries.

Make sure the batteries are installed correctly (positive and negative charge).
Do NOT mix new old batteries.
Do NOT mix batteries of different brands.

How to install spout mounted sensor faucet?

It is easy to install a brass touchless faucet, just by following our installation manual or checking the steps below:

Fix the faucet body to the basin with nuts and gaskets.
Drill two holes in the wall and fix the control box under the basin.
Connect the faucet water hose to the control box.
Connect sensor wire.
Plug adapter to the main power supply

Important Note: Make sure all the wires are well connected. Make sure the batteries are installed correctly.

+86 158 5847 1917

315th, Tongning road,Hongtang industrial C area,Jiangbei, Ningbo,China 315033

sales@tap-sensor.com

Motion sensor faucet troubleshooting
Problem	Possible Reason	Suggested Solution
No water flow	Batteries run out	Replace batteries
	Dirt on sensor surface	Clean the sensor surface
	Main water supply is shut off	Turn main water supply on
	Dirt on water filter net	Clean the water filter net
	Water pressure is not applicable	Refer to technical specification
Have a continuous water flow problem	Batteries run out	Replace batteries
Have a continuous water flow problem	Low water pressure	Refer to technical specification
Having leakage after turning off the faucet	Low water pressure	Refer to technical specification
Having leakage after turning off the faucet	Dirt on water filter net	Clean the water filter net

FAQ:

A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand in frontof the sensor will start the water flow, and the water will stop when you take your hand away.
If you forget to close the no-touch faucet, no problem, the sensor IC and program will control the water to stop automatically after 3mins continuously flow, time can be set.
More excitingly, the design of most touchless faucets is stylish and elegant to fit all basins, sink or lavatories, from classic to modern.

Yes, the touchless faucet is quite reliable. The technology of the infrared sensor is stable and developed for many years. Every KEGE touchless faucets are tested by life testing, valve on/off testing, infrared sensor distance testing and salt spraying testing. Sensor lifespan:500,000 times on and off, valve lifespan:1,000,000 times opening.

In the future of modern smart homes, a touchless bathroom faucet is also one core part. They’re cool, for one thing, as their motion sensors always give you some sort of smart, modern techy feelings. Plus, a touch-free faucet keeps your fixture and bathroom clean, it’s a good hygienic choice and decreases the risk of contracting viruses and diseases.

1. Battery issue: battery no power or battery installed in the wrong direction.
2. Sensor issue: the sensor got damaged, surface not clean or the waterproof cable connection issue.
3. Solenoid valve issue: the filter in the valve blocked or the valve is damaged.

For more details, please click here.

Yes, the mixer allows adjustment. But since the mixer is next to the solenoid under the sink, it’s not convenient to change the temp each time you use it.

Yes, the system uses ac 110/220V and double A batteries.