The waterfall sensor faucet is also called waterfall touchless faucet, waterfall automatic faucet, and waterfall sensor tap. It uses active infrared sensor technology that allows you to start the flow of water without touching the faucet.
It has 3 different height gooseneck faucets which can suit different basins. The sensor on the spout can auto-calibrate the sensor distance according to the working conditions and environment. Actually, it is a totally smart waterfall sensor faucet.
Appearance:
The waterfall sensor faucet comes in three different heights: 17cm,23cm and 33cm. It is a totally smart basin faucet that can work in all different situations.
How does the waterfall sensor faucet work?
The waterfall sensor faucet has the sensor eye on the spout. When you use it for the first time or when the power reconnects, the sensor eye automatically adjusts the sensor distance according to working conditions and the environment.
When you put your hands near the faucet and in the sensor detection range, the water starts flowing automatically. When your hands leave, the water stops. Or waiting after the setting minutes, normally 60 seconds and the water stops.
The working principle is easy and it is so easy and convenient to use the gooseneck sensor faucet, for more details, you can check our blog here.
Product details
The touchless faucet is the same structure as the others. It has a faucet body with sensor eyes. And a control box with a battery holder and solenoid valve inside.
You can choose a different power supply with either DC 6V or AC 110-240V.
Dimension
Technical specification:
Power supply | Material | Inlet/Outlet diameter | Temperature mixer | Static consumption | Sensor distance | Sensitivity | Max. water flow | Working temperature | Storage temperature | Response time | Water pressure |
---|---|---|---|---|---|---|---|---|---|---|---|
DC 4.5-6.4V with 4 AA alkaline batteries/ AC110-240V adapter– Output: 5.0-6.5V/1A (Ripple<60mW) | Brass | G1/2″ | No/for cold water only, but can install a mixer valve | ≦ 40 uA | 1.Adjustable range 7-21CM 2. . Default distance when power connected 9±10%CM Sensor distance will automatically be adjusted in 30s. | 0.512s | 60s±6s | 0 ~ 50 ℃ | -40 ~ 80 ℃ | Open≤1s, close≤1.5s | 0.05MPa-0.6MPa |
Package
Net weight | Gross Weight | Inner package | Outer package | Quantity per carton |
---|---|---|---|---|
2.3KG | 2.8KG | 380*170*113mm | 525*395*360mm | 9pcs |
Automatic on/off
- The infrared sensor faucet automatically turns on and off (Convenience & Hygiene).
- Time Limit: Washing time is set for 60 seconds.
Low Power Indication
This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
Sensor Distance Automatically Adjusted
Sensor distance is automatically adjusted according to working
conditions and environment.
Battery and Main Power Supply
- Power supply: DC6V/AC110-240V
- The valve will automatically stop water from flowing if no power is supplied.
Battery replacement
Please replace the battery when the indicator light continuously and slowly double flashes:
- Remove the battery case cover
- Replace with 4 AA alkaline batteries.
How to install waterfall sensor faucet?
- Fix the faucet body to the basin with nuts and gaskets。
- Drill two holes in the wall and fix the control box under the basin.
- Connect the faucet water hose to the control box.
- Connect sensor wire.
- Plug adapter to the main power supply.
Motion sensor faucet troubleshooting |
||
Problem | Possible Reason | Suggested Solution |
No water flow | Batteries run out | Replace batteries |
Dirt on sensor surface | Clean the sensor surface | |
Main water supply is shut off | Turn main water supply on | |
Dirt on water filter net | Clean the water filter net | |
Water pressure is not applicable | Refer to technical specification | |
Have a continuous water flow problem | Batteries run out | Replace batteries |
Low water pressure | Refer to technical specification | |
Having leakage after turning off the faucet | Low water pressure | Refer to technical specification |
Dirt on water filter net | Clean the water filter net |