Touchless Sensor Toilet Flusher | Stainless Steel Satin Surface

Brand: KEGE

Item No: KEG-GB-8306AD

Normal Mode Flush and Water Saving Mode Flush

Hygienic, bacteria and germs free without touching

304 Stainless steel brushing panel

Features:

Flush program: Single-chip microcomputer control,normal Mode flush time 9s; Water saving Mode:usage time less than 1min: 4s/flush while usage time more than 1min: 9s/flush.
Automatically flush if toilets no usage in 24 hours.
Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
Water-saving: Water-efficient toilet flusher valve reduces overall water usage without sacrificing water.
Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.
All stainless steel embedded box,copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
Healthy and Safe: Touch free, it can prevent the spread of bacteria and germs, convenience and hygiene.
All copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
Waterproof connector, with waterproof grade up to IP × 67.

AUTOMATIC TOILET FLUSHER GENERAL INFORMATION
Model No.	Type	Material	NW./GW.	Warranty	Inner package	Outer package	Quantity per carton
KEG-GB-8306AD	Automatic Toilet Flush	304 S/S brush	4.1/4.3KG	One Year	378165112mm	520390475mm	12pcs

Automatic Toilet Flusher KEG-3166AD installation for crouching and seating

AUTOMATIC TOILET FLUSHER TECHNICAL SPECIFICATION
Working power	Average static power consumption	Instant dynamic power consumption	Working water pressure	Sensor distance	Error detection time	Environment temperature	Medium temperature	Inlet/Outlet diameter
DC6V & AC220V	<50uA	<2.5W	0.2-0.7MPa	60±5cm to white board (about 45cm to body)	<3 second	1~40℃	0~65℃	G1″

Automatic Toilet Flusher KEG-GB-8306AD Control-box

How to install automatic toilet flush?

Touchless Toilet Flusher Troubleshooting
Problem	Possible Reason	Suggested Solution
No water flow	Batteries run out	Replace batteries
	Dirt on sensor surface	Clean the sensor surface
	Main water supply is shut off	Turn main water supply on
	Dirt on water filter net	Clean the water filter net
	Water pressure is not applicable	Refer to technical specification
Have a continuous water flow problem	Batteries run out	Replace batteries
Have a continuous water flow problem	Low water pressure	Refer to technical specification

Auto toilet flusher, hygienic, bacteria and germs free without touching, reduce COVID-19 spreading.

People who are asking more:

How Does automatic toilet flusher Work?

Automatic toilet flusher uses infrared sensor technology that will flush automatically after leaving, the sensor detects and gives a pulse signal to the solenoid valve, when you leave, flush automatically. Microchip controls all the processes.

Do AUTO toilet FLUSH need electricity?

Auto toilet flushers need electricity for sure. Both the sensor and solenoid valve works need electricity power.
Normally three choices:
DC: 4xAA alkaline 6V batteries;
AC: use a transformer to transfer power from 220V/380V to 6V;
DC/AC：Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

How long do batteries last in AUTOMATIC FLUSHer for toilets?

6V with 4xAA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.

how to manually flush a toilet?

Normally there is a manual button on top of the cistern. If the automatic flush and remote control functions fail, you can active the manual button.