KEY SPARE PARTS

Toilet Flush Solenoid Valve KEG-F06

Toilet Flush Solenoid Valve KEG-F06

    • The brass solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for automatic toilet flusher.
    • Brass, cheap and bi-stable solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Brass solenoid valve  KEG-F06
    		 Brass and coil
    		 automatic toilet flusher One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    6V Brass Bi-Stable Solenoid Valve KEG-F01B

    6V Brass Bi-Stable Solenoid Valve KEG-F01B

    • The brass solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for automatic toilet flusher and urinal flusher.
    • Brass, cheap and bi-stable solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Brass solenoid valve  KEG-F01B
    		 Brass and coil
    		 automatic toilet flusher or urinal flusher One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F01B sizes:

    Solenoid Valve KEG-F01B sizes

    6V Brass Flusher Solenoid Valve KEG-F03A

    6V Brass Flusher Solenoid Valve KEG-F03A

    • The brass solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for automatic toilet flusher and urinal flusher.
    • Brass, cheap and bi-stable solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Brass solenoid valve  KEG-F03A
    		 Brass and coil
    		 automatic toilet flusher or urinal flusher One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F03A sizes:

    Solenoid Valve KEG-F03A sizes

    6V Brass Solenoid Valve For Automatic Toilet Flusher KEG-F31

    6V Brass Solenoid Valve For Automatic Toilet Flusher KEG-F31

    6V Brass Solenoid Valve For Automatic Toilet Flusher KEG-F31

    The brass solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for automatic toilet flusher.
    • Brass, cheap and bi-stable solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Brass toilet flusher solenoid valve  KEG-F31
    		 Brass and coil
    		 automatic toilet flusher One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F31 sizes:

    6V Brass Solenoid Valve For Automatic Toilet Flusher KEG-F31 sizes

    Urinal Flusher solenoid valve KEG-F18A

    Urinal Flusher Solenoid Valve KEG-F18A

    Urinal Flusher solenoid valve KEG-F18A

    The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for automatic urinal flusher.
    • Black ABS based, cheap and bi-stable solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Urinal flusher solenoid valve          KEG-F18A
    		 ABS and coil
    		 automatic urinal flusher One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F18A sizes:

    6V Urinal Flusher Solenoid Valve KEG-F18A

    Latching Bi-stable ABS Solenoid Valve KEG-F09B

    Brass Solenoid Valve KEG-F07A/B

  • Brass solenoid valve KEG-F07A
    KEG-F07A
  • Brass solenoid valve KEG-F07B
    KEG-F07B
  • Brass solenoid valve KEG-F07A
  • Brass solenoid valve KEG-F07B

    • The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for the bathroom, washroom, kitchen touchless faucet.
    • Brass SOLENOID VALVE, good and bi-stable quality.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti-reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Brass solenoid valve          KEG-F07A/B
    		 Brass
    		Bathroom, kitchen, washroom touchless faucet One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F07A sizes:

    Brass Solenoid Valve KEG-F07A sizes

    Solenoid Valve KEG-F07B sizes:

    Brass Solenoid Valve KEG-F07B sizes

    Latching Bi-stable ABS Solenoid Valve KEG-F09B

    Latching Bi-stable ABS Solenoid Valve KEG-F09A/B/C

  • Bi-stable ABS solenoid valve F09A
  • Bi-stable ABS solenoid valve F09B
  • Bi-stable ABS solenoid valve F09C
  • Bi-stable ABS solenoid valve F09A
  • Bi-stable ABS solenoid valve F09B
  • Bi-stable ABS solenoid valve F09C

    • The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for the bathroom, washroom, kitchen touchless faucet.
    • ABS base SOLENOID VALVE, the best rated latching solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection, and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Latching 6V solenoid valve          KEG-F09A/09B/09C
    		 Brass and plastic Bathroom,kitchen, washroom touchless faucet One Year

    Technical Specification:

    Rated Voltage Flow capability Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 0.05Mpa>5L/min 0.3Mpa>20L/min 0.8Mpa>28L/min DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with male socket or DC connector ≥1,000,000cycles

    Solenoid Valve KEG-F09A sizes:

    Solenoid Valve KEG-F09A sizes

    Solenoid Valve KEG-F09B sizes:

    Solenoid Valve KEG-F09B sizes

    Solenoid Valve KEG-F09C sizes:

    Solenoid Valve KEG-F09C sizes

    latching bi-stable solenoid valve

    Latching Bi-stable ABS Solenoid Valve KEG-F07BHO

  • Latching Bi-stable ABS Solenoid Valve KEG-F07BHO
    KEG-F07BHO
  • Latching Bi-stable ABS Solenoid Valve KEG-F07BHO

    • The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • Used for the touchless bathroom faucet, touchless kitchen faucet.
    • ABS base SOLENOID VALVE, the best rated latching solenoid valve.
    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Latching 6V solenoid valve          KEG-F07BHO
    		 Brass and plastic Touchless faucet One Year

    Technical Specification:

    Rated Voltage Coil resistance Switch mode Pulse width Working pressure Water Temperature Default wire socket Life Time
    DC6V 12 Ω, 18 Ω, 26 Ω ± 1 Ω (at 20 ℃) DC pulse ≥20ms 0.05Mpa-0.8Mpa 5~70℃ Valve with female socket ≥1,000,000cycles
    BI-STABLE SOLENOID VALVE FOR FAUCET KEG-8905

    Solenoid Valve for touchless faucet keg-8905

    SOLENOID VALVE FOR TOUCHLESS FAUCET KEG-8905
    KEG-8905

    The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Pulse 6V solenoid valve          KEG-8904 Brass and plastic Touchless faucet One Year

    Technical Specification:

    Rated Voltage Coil resistance Switch mode Pulse width Working pressure Medium Temperature Default wire socket Life Time
    DC6V 12 Ω, 18 Ω, 26 Ω ± 1 Ω (at 20 ℃) DC pulse 10ms-30ms 0.05Mpa-0.8Mpa 1~75°C(set according to customer’s needs) Valve with female socket ≥1,000,000cycles

    BI-STABLE SOLENOID VALVE FOR FAUCET KEG-8902

    6V Solenoid Valve for touchless faucet keg-8904

    6V SOLENOID VALVE FOR TOUCHLESS FAUCET KEG-8904
    KEG-8904

    The solenoid valve is a switch to control the water on and off. The positive or negative signals from the sensor control the solenoid valve. The polarity of the signal determines if the solenoid will either engage a pull or push actions. The valves control the water flow by using a rubber-like disc. When there is no signal, the valve is closed, meaning no water flow through the faucet. The presence of a hand will send a positive signal to the solenoid causing it to pull the valve open for water to flow. The solenoid will close up the valve by a push action when the hand is no more.

    Features:

    • The bistable pulse solenoid valve adopts the core product of “independent research and development, technical innovation” of our company. The unique internal structure design greatly reduces the movement resistance of the valve core in the cavity and the impact of the medium on the valve body when the valve body is opened and closed and enhances the reliability and service life of the valve.
    • It shortens the pulse width required for the valve switch at the highest and the lowest pressure. It is an ideal terminal control device for infrared induction sanitary ware. It is made of all copper and adopts a special rubber covered anti reverse plugging connecting wire. The waterproof grade can reach above IP x 5.
    • Anti-blocking device is installed at the water inlet to ensure the normal water inlet and outlet.
    • It solves the defects of large flow and small opening pressure of the common solenoid valve and meets the requirements of large flow and high pressure of customers.
    • Unique design, making it beautiful, easy to maintain, low energy consumption, low noise environmental protection and energy-saving products.

    Basic Information:

    Type Material Application Warranty
    Pulse 6V solenoid valve          KEG-8904 Brass and plastic Touchless faucet One Year

    Technical Specification:

    Rated Voltage Coil resistance Switch mode Pulse width Working pressure Medium Temperature Default wire socket Life Time
    DC6V 12 Ω, 18 Ω, 26 Ω ± 1 Ω (at 20 ℃) DC pulse 10ms-30ms 0.05Mpa-0.8Mpa 1~75°C(set according to customer’s needs) Valve with female socket ≥1,000,000cycles

    Dimension:

    Solenoid Valve keg-8904 dimension