Touchless Toilet Flusher With Manual Flush Button | Motion Sensor

Brand: KEGE

Item No: KEG-3701AD

6s flushing time after leaving

Hygienic, bacteria and germs free without touching

Stainless steel panel with manual flush button

Features:

Flush program: Single-chip microcomputer control,normal Mode flush time 9s; Water saving Mode:usage time less than 1min: 4s/flush while usage time more than 1min: 9s/flush.
Automatically flush if no usage in 24 hours.
Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power going to the unit.
Water-saving: Water-efficient toilet flusher valve reduces overall water usage without sacrificing water.
Energy-saving: 4AA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.
All stainless steel embedded box,copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
Healthy and Safe: Touch free, it can prevent the spread of bacteria and germs, convenience and hygiene.
All copper cast nickel plated solenoid valve is adopted, with water regulation and filter protection device built in.
Waterproof connector, with waterproof grade up to IP × 67.

Touchless Toilet Flusher KEG-3701AD size

Automatic Toilet Flusher KEG-3701AD installation for groove and seating

Auto Toilet Flusher KEG-3701AD Specification

External Power Supply

Applicable water pressure

Applicable Water Temperature

Ambient Temperature

Feedwater caliber

Flushing water volume

4XAA batteries

AC:110v-240V,50Hz-60Hz

DC&AC combined

0.3-0.8Mpa

0.1-60℃

0.1-45℃

G1”

4-6L(10s based on water pressure of 0.3-0.6Mpa)

Automatic Toilet Flusher Concealing KEG-312AD structure

How to install automatic toilet flush?

Touchless Toilet Flusher Troubleshooting
Problem	Possible Reason	Suggested Solution
No water flow	Batteries run out	Replace batteries
	Dirt on sensor surface	Clean the sensor surface
	Main water supply is shut off	Turn main water supply on
	Dirt on water filter net	Clean the water filter net
	Water pressure is not applicable	Refer to technical specification
Have a continuous water flow problem	Batteries run out	Replace batteries
Have a continuous water flow problem	Low water pressure	Refer to technical specification

Auto toilet flusher, hygienic, bacteria and germs free without touching, reduce COVID-19 spreading.

People who are asking more:

How Does automatic toilet flusher Work?

Automatic toilet flusher uses infrared sensor technology that will flush automatically after leaving, the sensor detects and gives a pulse signal to the solenoid valve, when you leave, flush automatically. Microchip controls all the processes.

Do AUTO toilet FLUSH need electricity?

Auto toilet flushers need electricity for sure. Both the sensor and solenoid valve works need electricity power.
Normally three choices:
DC: 4xAA alkaline 6V batteries;
AC: use a transformer to transfer power from 220V/380V to 6V;
DC/AC：Both DC/AC models existed, firstly use AC power to work, if AC no power then DC start to work.

How long do batteries last in AUTOMATIC FLUSHer for toilets?

6V with 4xAA alkaline batteries shall last approximately 3000 times/month for 1.5 to 2 years.

how to manually flush a toilet?

Normally there is a manual button on top of the cistern. If the automatic flush and remote control functions fail, you can active the manual button.